High Quality Glass Solar Panel 10W 18V Monocrystalline Tempered Glass PV Panel Solar Kit For Street Lights RV Car Battery Charge
Maximum power(Pmax) 10W
Output tolerance ± 3%
Maximum system voltage 1000V DC
Open circuit voltage(Voc) 21.6V
Short circuit current(Isc) 0.61A
Maximum power voltage(Vmp) 18V
Maximum power current(Imp) 0.55A
Cell efficiency 19.5%
Operating temperature(NOCT) 45±2℃
Temperature range -40℃~+80℃
Cell Monocrystalline silicon
Number of cells 36pcs
Weight 1100g
Size 325*280*17 mm/290*275*17mm
Surface material Toughened glass
Back film Color White
Output port 2 m long MC4 connector wire
Waterproof Yes
Standard Test Conditions : lrradiance 1000w/m^2,Temperature 25℃, AM=1.5
Features:
1.Select high-efficiency monocrystalline silicon solar cells, the power generation efficiency is about 1.2 times that of conventional polysilicon, and the overall area is smaller at the same power.
2.The surface is made of Toughened glass, which is more wear-resistant and improves the absorption efficiency of sunlight.
3. With high light transmittance, safe and reliable, not afraid of high temperature, no danger of burning or explosion.
4.The junction box adopts IP67 waterproof design, contains bypass diode, and the circuit adopts overcharge and reverse current protection design.
5.Use photovoltaic special cable and MC4 connector, outdoor use is safe, waterproof, high temperature resistance and weather resistance. MC4 connector is easy to use, plug and play.
6.This product is a solar module. It is recommended to be used with controllers and batteries. It can be used in various scenarios such as households, camping, RVs, yachts, street lights and solar power stations.
Notes for use:
1. This product must not come into contact with highly corrosive substances.
2. It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use.
3. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout.
4. The suitable ambient temperature range of this product: -20 ° C-80 ° C, please do not exceed this range.
5.The solar panel must be installed in an area with good sunlight and no shadow. The long-term work of the solar cell module in the sun with shadow may have the risk of burning.
6.It is forbidden to connect the positive and negative poles of the product together, otherwise it will damage the product.
7.The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller.
8.The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller.
9. The inverter can only be connected to the battery, not directly to the controller.
Package included:
1 x 10W glass solar panel
or
1 x 10W glass solar panel
1 x 10A 12V/24V Controller
1 set 2m PV connector cable with alligator clip
Reviews
There are no reviews yet.